SAE AMS6448 Steel Bars, Forgings, and Tubing, 0.95cr 0.22v (0.48-0.53c) (SAE 6150)

上一篇: SAE AS9696 Bolt, Machine - Double Hexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32 Unjf-3a
下一篇: SAE AS58091 Circuit Breakers, Trip-Free, Aircraft General Specification For

Product Code:SAE J2765
Title:Procedure for Measuring System COP [Coefficient of Performance] of a Mobile Air Conditioning System on a Test Bench
Issuing Committee:Interior Climate Control Committee
Scope: 1.1This Standard applies to motor driven mobile air conditioning systems consisting of one in-car air coil (evaporator), a compressor, an expansion device, and one under-hood air coil (condenser). 1.1.1This standard can also be used for measuring systems that use electrically driven compressor if measurement of input power to compressor is carefully considered.1.1.2This standard can also be used for measuring systems that include the entire air handling system if air side pressure drop for the entire vehicle system is carefully considered.1.1.3This standard can also be used for measuring systems that include the entire front end cooling module if air side pressure drop for the entire vehicle system is carefully considered.1.1.4This standard can also be used for measuring systems that include a secondary cooling loop if the power to drive the pumps in this system is carefully considered.1.2This Standard specifies procedures, apparatus, and instrumentation that will produce accurate steady state capacity and efficiency data for refrigerant components.1.3This Standard does not:1.3.1Specify tests for dual evaporator systems,1.3.2Specify transient test methods, 1.3.3Make recommendations for safety1.3.4Specify tests for production, specification compliance, or field testing of mobile air conditioning systems.
Rationale: 1.1This Standard applies to motor driven mobile air conditioning systems consisting of one in-car air coil (evaporator), a compressor, an expansion device, and one under-hood air coil (condenser). 1.1.1This standard can also be used for measuring systems that use electrically driven compressor if measurement of input power to compressor is carefully considered.1.1.2This standard can also be used for measuring systems that include the entire air handling system if air side pressure drop for the entire vehicle system is carefully considered.1.1.3This standard can also be used for measuring systems that include the entire front end cooling module if air side pressure drop for the entire vehicle system is carefully considered.1.1.4This standard can also be used for measuring systems that include a secondary cooling loop if the power to drive the pumps in this system is carefully considered.1.2This Standard specifies procedures, apparatus, and instrumentation that will produce accurate steady state capacity and efficiency data for refrigerant components.1.3This Standard does not:1.3.1Specify tests for dual evaporator systems,1.3.2Specify transient test methods, 1.3.3Make recommendations for safety1.3.4Specify tests for production, specification compliance, or field testing of mobile air conditioning systems.【英文标准名称】:CONVEYORBELTS.ELECTRICALCONDUCTIVITY(SPECIFICATIONANDMETHODOFTEST).
【原文标准名称】:传送带.导电性.规范和试验方法
【标准号】:NFT47-109-1983
【标准状态】:作废
【国别】:法国
【发布日期】:1983-04
【实施或试行日期】:1983-03-07
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:电气试验;试验设备;合成橡胶;天然橡胶;名称与符号;试样;输送带;橡胶制品;电阻率
【英文主题词】:electricalresistivity;naturalrubber;syntheticrubber;designations;electricaltests;conveyorbelts;rubberproducts;electricaltesting;testspecimens;testequipment;designation;resistivity
【摘要】:
【中国标准分类号】:G42
【国际标准分类号】:
【页数】:4P;A4
【正文语种】:其他